Intended use Your Stanley Fat Max, FMCD900M1S, FMCD900M2S, FMCD900B SDS rotary hammer have been designed for drilling in wood, metal, plastics, and masonry as well as for screwdriving and light chiselling applications. These tools are intended for professional and private, non professional users.
Page 4
ENGLISH (Original instructions) b. Avoid body contact with earthed or grounded 4. Power tool use and care surfaces such as pipes, radiators, ranges and a. Do not force the power tool. Use the correct power refrigerators. There is an increased risk of electric shock tool for your application.
Do not attempt to charge damaged batteries. Health hazards caused by breathing dust developed when using your tool (example:- working with wood, especially oak, beech and MDF.) Chargers Use your Stanley FatMax charger only to charge the battery in the tool with which it was supplied.
Page 6
If the supply cord is damaged, it must be replaced handle (6) onto the front of the tool as shown. by the manufacturer or an authorised Stanley FatMax Service Rotate the side handle into the desired position. Centre in order to avoid a hazard Tighten the side handle by turning the grip clockwise.
Concrete The performance of your tool depends on the accessory used. Steel Stanley Fat Max accessories are engineered to high quality Wood standards and designed to enhance the performance of your tool. By using these accessories you will get the very best...
FMCD900M1S, FMCD900M2S, FMCD900B SDS Rotary hammer Guarantee Stanley Fat Max is confident of the quality of its products and Stanley Europe declares that these products described under offers consumers a 12 month guarantee from the date "technical data" are in compliance with: of purchase.