USE AND OPERATION
6.6
Transport position
Raise the support foot 1) (Rear coupling)
►
►
Close the arms.
Do not force the closure of the 2
CAUTION
►
Position the flail head with its flails facing the inside of the machine.
►
Raise the machine using the tractor rear lifting device.
When PTO is disengaged, make sure that the cardan shaft does not exceed 30° inclination,
to avoid damage to the shaft.
CAUTION
►
Check that the tractor hydraulic lifting levers are blocked, to avoid the machine coming down during transport.
►
If the machine profile covers the tractor tail lights, fit a rear bar with warning lights.
►
Attach appropriate signs indicating machine overall dimensions and footprint.
►
Observe all the road transport requirements.
►
Consult section 2.2 -Safety rules concerning road traffic in this manual.
When flexible controls are fitted:
Close the hydraulic tap (1) turning it to (POS. A).
►
90
REAR COUPLING
TOP COUPLING
arm when it is resting on the foot (1).
nd
Top linkage
A
T250A-T320A
A
6.15
Rev. 1.1
1