Advertisement
Albeo
ABR2 LED Luminaire
®
Section 1: Unit Installation
Provide at least 12" of clearance from the top of the fixture to any ceiling or surface above.
A
Carefully unpack unit and properly inspect
for defects before installing. Wear work
gloves to prevent dirt and oil from being
transferred to the luminaire.
NOTE: The standard configuration uses a 3-conductor SOOW cable. The dimming option utilizes a 5-conductor SOOW cable for both AC
and 0-10V control wires.
NOTE: For applications requiring the "R" corrosion resistant finish, use mounting hardware appropriate for the environment.
Section 2: Chain or Cable Mounting
Please follow all UL, NEC and minimum load rating guidelines when selecting and installing a cable or chain.
NOTE: When selecting chain, a joint in a circular chain link shall be welded. A joint in a chain link of another shape shall not be located
within 30 degrees of the vertical unless welded.
Attach to
structural
member
Attach to
structural
member
Single Fixture
Hang two chains/cables from a structural member of the ceiling. Fixture must be supported independently of an outlet box. Loop chain/
Single Fixture
cable through the mounting slots next to each fixture end. Chain/cable mounting locations must be in the slots at the ends of the fixture.
Section 3: Threaded Rod Mounting
Attach to
structural
Fasten
member
Attach to
with nuts
structural
Fasten
member
with nuts
Secure two 1/2" threaded rods into structural members in ceiling. Place a nut on each threaded rod where fixture should hang. Slide rod
mount brackets onto threaded rods and tighten second nut onto rods to secure fixture.
NOTE: Safety chains can be used in mounting slots at end of fixture.
B
Choose a mounting method: chain or cable,
rod mount, or pendant mount.
Fixture Weight
Fixture Weight
ABR1-Series
Max. Weight (lbs.)
Max. Weight (lbs.)
ABR2-Series
Configuration
120/277V
Configuration
120/277V
Single
21
Single
21
Dual
45
Dual
45
See Note
Single Fixture
See Note
Single Fixture
2
C
Wire colors:
Black
White
347/480V
Green
347/480V
23
Purple
23
49
Gray
49
Attach to
structural
member
Attach to
structural
member
See Note
See Note
Installation Guide
Live
Black
Live
Neutral
White
Neutral
Safety Ground
Green
Safety Ground
0-10V (+)
Purple
0-10V (+)
0-10V (–)
Gray
0-10V (–)
Dual Fixture
Dual Fixture
Dual Fixture
Dual Fixture
Advertisement
