Sony Ericsson Z1010 Working Instruction, Sp/Mechanical page 46

2
3
•
•
•
3/000 21-1/FEA 209 544/77 A

Sony Ericsson Mobile Communications AB
Fig.3.42
Fig.3.43
Assemble the vibrator as described in 3.3
Assemble the VGA Camera as described in 3.5 VGA
Assemble the phone as described in 2 Reassembly Upper & Lower cabinets, step 22,
23 and 26-28.
Working Instructions,SP/ Mechanical
Snap fit the Camera mirror
guiding pin into Lower Rear
Cabinet (1) and press down
Camera mirror (2).
Then turn the Lower Rear
Cabinet around with the
Camera mirror down.
(Fig.3.42)
Press down the Lower Rear
Cabinet and place the
soldering iron tip at the pin
until it melts. Remove the
soldering iron and continue to
hold down the Lower Rear
Cabinet for a couple of
seconds.
Be careful; do not touch the
vibrator cavity with the
soldering iron.
(Fig.3.43)
Vibrator,
Use a pair of tweezers or
your fingers.
Do not use this soldering
iron tip for soldering any
electrical component.
step 2.
Camera, step 2.
46(60)