Sony Ericsson Z1010 Working Instruction, Sp/Mechanical page 40

# Figure
10
11
• Assemble the phone as described in 2 Reassembly Upper & Lower cabinets, step 24-26.
3/000 21-1/FEA 209 544/77 A

Sony Ericsson Mobile Communications AB
Fig.3.30
Fig.3.31
Working Instructions,SP/ Mechanical
Instruction
Connect following flex films
on the PCB:
Main LCD flex (1).
Main PCB flex (2).
Camera flex (3).
Use Flexfilm assembly Tool
NTZ 112521.
Apply the new connector tape
upper, on the main LCD
connector.
Apply a new B2B Support pad
on the Cif camera connector, if
needed.
(Fig.3.30)
Place Status LCD in Frame
and connect flex film, use
Flexfilm assembly Tool NTZ
112521.
Close the connector; use
a pair of tweezers and push, in
the arrows direction.
(Fig.3.31)
Note
Be careful handling the
flex films.
40(60)