Audio Jack - Sony Ericsson Z1010 Working Instruction, Sp/Mechanical

3.5 Audio jack

Tools
•
Opening tool NTZ112 302/2
Instruction
•
Disassemble the phone as described in 1 Disassembly Upper & Lower cabinets, step 1,2
and 6.
•
Disassemble the Vibrator as described in 3.3 Vibrator, step1.
# Figure
1
2
•
•
3/000 21-1/FEA 209 544/77 A

Sony Ericsson Mobile Communications AB
Fig.3.3
Fig.3.4
Assemble the Vibrator as described in 3.3 Vibrator, step1.
Assemble the phone as described in 2 Reassembly Upper & Lower cabinets, step 23
and 26-28.
Working Instructions,SP/ Mechanical
Instruction
Open Audio jack cover with
your fingers.
(Fig.3.3)
1.Remove the Audio jack by
lifting the rear side. Use tool
NTZ112 302/2.
2. Place the new Audio jack in
cavity in Lower Rear Cabinet.
Start with the front, and then
carefully press down the back
of the Audio jack.
(Fig.3.4)
Note
Be careful handling the
connecting pins.
29(60)