Table of Contents
Advertisement
3
System Information/User Interface Functions
3-8
Using the Control Panel To Select and Monitor Frame Cards
To select another parameter group for the currently displayed device,
4.
press
Select Submenu
steps 1 and 2 above.
To select another device, press
5.
described in Selecting a Device, p. 3-5.
Note:
If a different device is selected, submenu and parameter value settings are
retained for the previous device. When the previous device is again selected,
its settings are again displayed and take effect.
The System Information/User Interface Functions mode allows the user to:
•
Check current network settings of the Control Panel.
•
Check system information related to the Control Panel.
•
Set user preferences such as backlight brightness ("Backlight Level")
of the Control Panel displays.
This mode has no effect on functional operation of the Control Panel.
Checking Current Network Settings
Check current network settings of the Control Panel as follows:
Press the
Select Device
1.
Press the
Select Submenu
2.
screen is now displayed.
Rotate any knob to select
3.
1 Current Network Settings
Press any knob in to display current network settings. An example of this
4.
display is shown on the next page.
Note:
Where the Lock icon (
in the currently displayed screen. Where the "P" icon (
cates to press the adjacent knob to open the value for editing.
OGCP-9000 REMOTE CONTROL PANEL PRODUCT MANUAL
and select the parameter group as described in
Select Device
key and then press the
key. The Control Panel Submenu selection
) appears, this indicates values cannot be changed
and select the device as
0
key.
) appears, this indi-
OGCP-9000-OM (V2.5)
Advertisement
Table of Contents
