Noise/Vibration Information; Mounting And Operation; Starting Operation; Inserting/Removing The Battery - Bosch CityMower 18 Original Instructions Manual

Charger
– Battery with min
6.0 Ah
Weight according to
EPTA‑Procedure
01:2014
Protection class

Noise/Vibration Information

Typically the A-weighted noise levels of the product are:
Noise emission values determined according to EN 60335-2-77.
– Sound pressure level
– Sound power level
– Uncertainty K
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 60335-2-77
– Vibration emission value a
h
– Uncertainty K

Mounting and Operation

Action
A)
Delivery scope
Mounting the handle
Snap together the Grassbox
Grassbox fitting/removing
Setting the height of cut
Inserting the battery
Operation
- Inserting the isolator switch
- Switching on
- Mowing
- Switching off
- Removing the isolator switch
Removing the battery
Working advice "mowing"
Blade maintenance/Blade replacement
Selecting accessories
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Starting Operation

For Your Safety
Warning! Switch off, remove the isolator switch and
u
the battery before adjusting or cleaning. The same ap-
plies when the cable to the switch in the handle is
damaged, cut or entangled.
Bosch Power Tools
AL 1810 CV
364
kg 0.17
/ II
u
Figure Page u
A 296
Charging the Battery
B 297
The battery is equipped with temperature monitoring that al-
C 298
lows charging only in the temperature range between 0 °C
D 298 and 35 °C. In this manner, a high battery service life is
achieved.
E 299
Note: The battery is supplied partially charged. To ensure
299
F
full battery capacity, completely charge the battery in the
G − I 300 −
battery charger before using for the first time.
302
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure
does not cause damage to the battery.
The "Electronic Cell Protection (ECP)" protects the lithium-
ion battery against deep discharging. When the battery is
J 303
empty, the product is switched off by means of a protective
circuit: The product no longer operates.
K 303
Do not continue to press the On/Off switch after an auto-
L 304
matic shut-off of the product. The battery could become
M 305
damaged.
Observe the notes for disposal of the battery.

Inserting/Removing the Battery

Note: Using unsuitable batteries can lead to malfunctions or
damage the machine.
Insert the charged battery. Ensure the battery is inserted
correctly.
To remove the battery from the machine, press the battery
unlocking button and pull the battery out.
AL 1815 CV AL 1830 CV
260 130
0.38 0.40
/ II
dB(A)
dB(A)
dB
2
m/s
2
m/s
The blade continues to rotate for a few seconds after
the machine is switched off.
Caution: Do not touch the rotating blade.
F 016 L81 908 | (11.03.2020)
English | 17
AL 1880 CV
62
0.60
/ II / II
3 600 HB9 A..
69
89
=1.0
< 2.5
=1.5