DURKOPP ADLER beisler 2112-5 Service Instructions Manual page 71

Programming
Switching the photocell for the seam beginning on or off
If the photocell that scans the initial position of the seam is switched off,
the machine control requires a fixed insertion distance for the machine
cycle.
Switching off the photocell results in a switch-over to a fixed insertion
length. This function is directly related to the Photocell correction
functions of the Service menu ( p. 53).
To switch the photocell for the seam beginning on or off:
1. Press the
 The alternating request of this function switches between the modes
Switching the photocell for the seam end on or off
If the photocell that scans the end position of the seam is switched off,
the machine control requires a fixed point for the seam end for the
machine cycle.
Switching off the photocell results in a switch-over to a fixed seam end
point. This function is directly related to the Photocell correction
functions of the Service menu ( p. 53).
To switch the photocell for the seam end on or off:
1. Press the
 The alternating request of this function switches between the modes
Switching the folder on or off
The folder places the pocket facing onto the pocket bag or the left fly piece
onto the left trouser component.
If this function is disabled, the pocket facing and the fly piece must be
manually placed onto the pocket bag and the left trouser component,
respectively.
To switch the folder on or off:
1. Press the
Service Instructions 2112-5 - 00.0 - 02/2020
key.
photocell for seam beginning and fixed insertion distance.
key.
photocell for seam end and fixed seam end point/fixed seam length.
key.
69