Advertisement
Features
• State of the art radio link with an interference free
operating range exceeding 10 metres.
• Uses 2.4GHz global, licence-free ISM radio band.
• Light touch joystick movement (0.5 Newtons).
• Receiver unit includes two additional sockets.
• Precise tracking and cursor control.
• Four cursor speed settings.
• Audible alert for speed setting.
• Large footprint for stability.
• Low profile providing a natural hand-rest for
comfortable operation.
• Left/Right and Drag Lock buttons.
• Colour coded buttons mounted sub-flush to prevent
accidental operation.
• Sockets in the joystick unit to operate Left/Right click
buttons from remote switches.
• Typical 6 months battery life.
• Easy 'plug and play' installation (no additional drivers
required).
• Auto detecting PS2 and USB protocols.
• PC and Mac compatible.
Compatibility
Optimax Joystick works with PS2 and USB compatible
computers including the majority of Personal Computers
(PCs) and Apple Macintosh computers.
Speed Control Setting
The OPTIMAX JOYSTICK has four cursor speed settings. To
change cursor speed press and hold down the Drag Lock
button until you hear a 'beep' and then release.
To reduce cursor speed, press the Left Click button (each press
incrementally reduces the speed). To increase cursor speed,
press the Right Click button (each press incrementally
increases the speed).
Once you have selected the most suitable cursor speed,
press and hold down the Drag Lock button until you hear a
'beep'. The cursor speed is now set.
Pack Contents
Carefully check the contents of the box, which are:
• Optimax Joystick unit
• Optimax Joystick Receiver unit with USB cable
• USB to PS2 adaptor plug
• T-Bar handle
• Soft ball handle
• Velcro mounting pad
• This manual
Installation
Ensure your computer is fully turned-off and not just in
sleep mode.
Locate the relevant PS2 or USB socket on your computer
and plug-in your OPTIMAX JOYSTICK Receiver unit (if you
are using the PS2 socket on your computer you will need
the USB/PS2 adaptor supplied).
To optimise the range of the radio link, do not place the
Receiver unit behind your computer or close to large metal
objects or sources of interference such as wireless network
hubs, cellular telephones etc.
1. Invert the Joystick unit and remove the battery
compartment cover using a screwdriver.
2. Connect a good quality 9-Volt PP3/6F-22 (or equivalent)
battery (not supplied) to the battery connector. Alkaline
batteries will give best battery life. Do not replace the
battery compartment cover at this stage.
3. Turn on the computer and allow it to fully boot up. Check
that the LED on the rear of the Receiver unit lights for a
few seconds and is then extinguished. If it remains lit,
refer to the 'Pairing' section.
4. Move the Joystick to check for cursor movement and
then replace the battery compartment cover. Your
OPTIMAX JOYSTICK is now ready for use. If there is no
cursor movement, refer to the Troubleshooting section.
Maintenance
Your OPTIMAX JOYSTICK has no user serviceable parts. If repair is
necessary the unit should be returned to Pretorian Technologies or
an authorised Distributor.
Advertisement
