Installation - Kogan KAZENTDRONA User Manual

INSTALLATION

1. Remote Control Battery
Insert batteries in remote control, paying attention to the battery polarity (+/-) as per the
illustration below.
2. Connect the USB cable to the computer to charge
To charge the device, connect the battery plug to the USB
charging cable, and insert the USB end into a computer or
compatible USB adapter. The indicator light will be on when
charging, and off once full. Do not leave on charge when full.
3. Connecting the drone power supply
Put the charged battery into the battery holder of the drone and then connect the power
supply's battery plug to the vehicle socket for power connection.
Note:
Refer to the battery safety information in this guide's Safety & Warnings page.
Switch