Organized Living freedomRail 1 Drawer Double Hang OBox Assembly Instructions

Contents of Package
Left Side
Drawer
Left Side
Assembling the 1 Drawer Double Hang OBox
Step 1: Attach Hanging Brackets
Left Side
Back Edge
Attach Hanging Brackets to Sides using Euroscrews. (If using power drill, set torque to low setting.)
Step 3: Attach Sides
Lock
(a) Attach Sides to Bottom. (b) Tighten Cams by turning clockwise until snug.
Proper Care for an OBox: Use Goo Gone™ or Simple Green® with a rag or putty knife to remove any excess glue or marring that was caused by shipping or assembly.
freedomRail Assembly Instructions
1 Drawer Double Hang OBox
Right Side
Drawer Back
Drawer Bottom
Drawer Front
Back Edge
Cam
Open
Bottom
Top
Drawer
Right Side
(4)
(2) Full Extension Drawer Glides
Step 2: Install Connector Bolts
Right Side
Install (4) Connector Bolts into small holes on Top and Bottom.
Step 4: Attach Top
(a) Attach Top. (b) Tighten Cams by turning clockwise until snug.
Over
Tools Required
(18)
Euroscrews
(2) 1 / " Wood Screws
(10) Connector Bolts
(2)
Hanging
Brackets
(1) Drawer Pull
Machine Screws
(For Drawer Pull)
Bottom
Smaller Holes for
Connector Bolts
Power Drill
#2 Phillips
Screwdriver
#2 Phillips Driver
Top
1