Page 2
INSTALLATION INSTRUCTIONS VOLT Solar Spotlight Kit ® VSAL-9001-25-BBZ Important: Please Read Before Installation This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty.
Page 3
Product Dimensions 2.5” 4”~ 5” 2.5” 1.5” Install Stake Determine the desired location Board for mounting the stake mount. Hammer the stake into the ground until flange of stake is flush to grade. To avoid damage to the stake, place a board on top of the stake while Stake hammering.
Page 4
INSTALLATION INSTRUCTIONS VOLT Solar Spotlight Kit ® VSAL-9001-25-BBZ Install Fixture to Stake Pass the fixture wire Fixture through the center opening of the stake. Thread the fixture onto the stake. Fixture Wire Hand tighten until snug. Ground Stake Soil Wire Connection: Option A (Recommended)
Page 5
Wire Connection: Option B Wire Connector Solar Panel Spot Light Solar Panel Supply Wire Spot Light Supply Wire Optional B: Connect with Wire Connectors You can choose from Option A or Option B to complete the installation. Option A is the recommended method to install the solar lights. Optional A: Strip the supply wire leads from the solar panel and the supply wire leads from the spot lights.
Page 6
INSTALLATION INSTRUCTIONS VOLT Solar Spotlight Kit ® VSAL-9001-25-BBZ Adjust Fixture Direction Using the Allen wrench, loosen Fixture the screw on the knuckle and adjust the fixture to your desired direction. Once your direction is achieved, tighten Screw the screw until snug.
Need help?
Do you have a question about the VSAL-9001-25-BBZ and is the answer not in the manual?
Questions and answers