Send Sensor Data To Airvantage - mangOH Red Getting Started Manual

mangOH Red Getting Started Guide (non-Octave)
· If General=LTE-Only:
i. Click the Change Provisioning Options icon in the toolbar:
ii. In the Provisioning options box, begin typing "SMS - MO" and select the option when it appears.
iii.Repeat and select SMS-MT.
iv.Click Change Provisioning Options.
This change will take a few minutes to take effect, and the General option will change to "LTE".
9. Keep your browser open to the AirVantage dashboard and continue to
below.

5.2 Send Sensor Data to AirVantage

Now that your "system" is registered on AirVantage, connect your mangOH Red to the AirVantage server and
begin transmitting sensor data:
1. On your computer, open a terminal window.
2. Connect to the mangOH Red:
$ ssh root@192.168.2.2
3. The mangOH Red platform includes two applications to collect sensor data and communicate it (send/receive)
to AirVantage—redSensor activates the mangOH Red's sensors, and redCloud communicates the sensor
data to the IoT cloud.
By default, redSensor should be running (sensors active) and, to conserve data, redCloud is stopped by
default.
Rev 1 2020-03-01 22
Send Sensor Data to AirVantage,
41113734