urban drivestyle UNI MK Classic User Manual page 35

Childseat Guidelines
Riding With Children
You may install and use a child seat provided that your seat and setup meet the following requirements (Based on EN 14344, European
Standard for Child's Seats for Electric bikes):
The seat is designed so that any contact between the child's feet and the wheel is impossible. The distance from the center of the
Wheel and the seat's center of gravity (as indicated by the center of gravity mark on the child's seat) should be no less than 90mm and
no more than 100mm. This will avoid the bike and Front Wheel from swinging upwards. The child's fingers are protected against being
caught in any part of the saddle (such as the springs of suspension saddles). The carrier (rack) is approved for mounting child seats.
Approved Child Seat
The Thule Yepp Maxi Easyfit has been tested to work with your UNI MK Classic/Swing E-Bikes with long seat extension racks.
An additional adapter rack on the long seat extension rack follows for 99% compatibility with other EN 14344 compliant seats.
Safety and Precaution
Children regardless of age, should be strong enough to hold up their head and withstand the bouncing
that comes with riding.
Check for sufficient heel clearance. Heel clearance varies with the rider's foot size and the child's leg length.
Make sure the seat is properly mounted in accordance with the manufactures instructions.
Make sure the maximum gross weight is not exceeded.
Make sure the child is wearing a helmet and straps are adjusted for a snug fit.
Always hold onto your E-Bike when a child is in the child seat to prevent the E-Bike and child from falling over.
Periodically check on your child while riding as they may fall asleep. Don't let their head strain excessively to one side.
Only use certified trailers to transport children
35