urban drivestyle UNI MK Classic User Manual page 25

Power Level
The display is integrated with the controller to provide several levels of power. Press  or  to change levels.
The default range is 0 - 9, where 0 means no output, and 9 means maximum output.
The default switch-on is level 1.
Battery Capacity
Distance
Press ON to shift between TRIP and TOTAL (Odometer).
TRIP Reset
With the power on, press and hold both ON and  to reset TRIP distance.
Error Codes
When something goes wrong with the system, an error code will pop up on the display. Check details on attached list.
NOTE: The motor will stop working in the event of an error. Only when the error is gone, will the motor work again.
Four sections highlight when battery is full.
Percentage of capacity for sections. The battery icon flashes at 1 Hz when it is
low on power.
25