Grundfos OD 401 Installation And Operating Instructions Manual page 5

1.1 Mounting kit
1
• Steel frame for mounting the OD 401 operator display.
• The OD 401 can be mounted for operation from the front
or from below with a tilt angle of 12°.
• Steel frame for mounting the OD 401 operator display.
• The OD 401 can be mounted for operation from above.
• IP 55 cabinet with cable gland.
• Fasten the OD 401 with the four TORX screws,
type M5 x 40 PH-FZB.
• Hexagon socket head screws, type M4 x 6 US-A4
2
(pos. 1).
• TORX screws, type M5 x 40 PH-FZB (pos. 2).
5