Grundfos OD 401 Installation And Operating Instructions Manual page 4

CONTENTS
1. Applications
1.1 Mounting kit
2. Mounting
3. Disposal
Prior to installation, read these installation
and operating instructions. Installation and
operation must comply with local regula-
tions and accepted codes of good prac-
tice.
1. Applications
This mounting kit is used for mounting the OD 401
operator display in a specially designed cabinet.
The mounting kit consists of
• 1 stainless steel frame,
• 1 IP 55 cabinet,
• 1 Pg cable gland and
• 8 screws.
The steel frame is available in two versions.
One for operation from the front or from below and
the other for operation from above.
4
Page
4
5
6
7