Lindy 38264 User Manual page 7

User Manual
Troubleshooting
There is no display on the screen.

Check that the DC plug and jack used by the external power supply are firmly connected.

Check that the Cat.5e/6 or higher cable is plugged in correctly and that the Status LED is flashing
slowly.

Check that the HDMI source and display are both powered on and active.

Power off all the devices, then power on in this order: first, the Transmitter and Receivers, then the
display and finally the source.

For some HDMI devices it may be helpful to unplug and re-plug their HDMI connection to re-initiate
the HDMI handshake and recognition.

Reduce the length of HDMI cable used, or use a higher quality cable. Please refer to the Specification
section for the maximum distance/resolution/cable combinations.

Check no other IP device is generating traffic on the same network dedicated to the extender system.
USB Keyboard or mouse are not working

Check that the DC plug and jack used by external power supply are firmly connected.

Check that the CAT5e/6 or higher cable is plugged in correctly and that the Status LED is flashing
slowly.

Check that the USB keyboard and mouse work correctly when connected directly to the source device.

If you are using wireless USB devices, please replace them with wired devices.
English