Wifi Antenna Connector - MTX iT1air Owner's Manual

Lightning Dock & Compatible Devices
Put one of the following devices in the Lignhtning dock. Press
the tunes stored on your device.
The Aplle devices not listed here are still compatible. But they'll have to use the USB input (see

Wifi Antenna Connector.

Screw the included wifi antenna here for optimal Airplay® performances.
AUX Analog 3,5mm Jack Input.
Use this input with stereo analog signals from a TV, a Blue Ray/DVD/CD player, an MP3 player, a Tablet, a cellular phone, etc.
Do not forget to press "AUX input"
Apple® USB Input.
Do not forget to press once or twice to activate the USB input. The LED will turn green.
USB works with iPhone 5, iPhone 5C, iPhone 5S, iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G, iPhone, iPad air, iPad (3rd and 4th
generation), iPad 2, iPad, iPad mini, iPod touch (1st through 5th generation), iPod classic, and iPod nano (1st through 7th generation).
AC Power Socket.
Connect your iT1air to the power supply. Use the included power cord.
The unit is compatible with 100~120V / 220~240V AC, 50~60Hz. You don't need to move any switch, the selection is automatic.
IR Remote Control.
Before using the remote control, you must install two AAA batteries. Remove the bottom panel with a 2mm HEX key. Follow the (+)
and (-) signs located around the two springs. See "How To : Install the Batteries in the Remote Control" on the next page.
Stand By On/Off
Source Select : AirPlay
Volume Down
Skip Back/Browse Left
OK
Menu/Browse Back
Subwoofer vol. Down
till the LED#2 turns to red. Launch Music and push play. Enjoy
to activate the AUX Analog jack input. The LED will turn purple.
)
Source Select : Dock & USB
Source Select : Aux (Jack)
Volume Up
Browse Up
Skip Forward/Browse Right
Browse Down
Play/Pause
Subwoofer vol. Up