What's In The Box; Led Status Summary - MTX iT1air Owner's Manual

Thank You !
Thank you for purchasing the MTX iT1air high-end, high-definition audio system. The iT1air is designed to deliver a deeper dimension
that brings your music to life. No other system provides the exacting measure of clarity in such a small enclosure. Whether you are
listening from your iPad, iPhone, iPod or computer, the iT1air delivers outstanding sound quality. The iT1air is your new favorite Hi-Fi
system. Congratulations for making a smart choice and enjoy the ultimate audio experience with MTX.

What's In the Box ?

1. The iT1air unit. Use caution when unpacking as the unit is heavy.
2. IR remote control. Batteries are not included.
3. Wi-Fi antenna to be connected to the Wi-Fi socket on the back of the unit.
4. Two power cords. One for the European plug (CEE 7/16 Type C and one for the United Kingdom plug (BS 1363 Type G).
5. The owner's manual.
Quick Start with Airplay :
1. Connect the iT1air to the wall outlet. Switch on the unit - press "Power"
2. Verify your iPhone, iPad or iPod Touch is connected to the Wi-Fi network you want to join.
3. Connect your device to the Dock (LED#2 red) or to the USB (LED#2 green).
4. Push the Wi-Fi control
with the iT1air. Accept. The iT1air is now available in the Wi-Fi network. The LED#1 should be solid Blue. You can now disconnect your
device from the iT1air.
5. Use your computer or iDevice and open "iTunes" or "Music". In the Airplay devices list, choose "MTX iT1air" and hit play to start
listening to music.

LED Status Summary :

iT1air Placement and Installation :
The location of your iT1air in the room is crucial for sound quality and bass level. The unit is equipped with two side subwoofers and
is able to reproduce very low frequencies. Some guidelines should be followed to get the best possible result.
1. Install the unit at an equal distance between the two side walls to get the largest possible staging. The side walls will act as
reflectors.
2. If you reduce the distance between the unit and the back wall, the bass level will rise. If you increase the distance, the bass level
will decrease. Choose distance based on your preference.
3. Your ears and the iT1air should be in the same horizontal plane for perfect definition.
4. To get the best possible result, do not put the unit on a table with a large panel in front of the speakers as it will reflect the sound
in an undesireable way.
5. Adjust the subwoofer level with the remote control.
once. The unit will display a message on your iDevice asking if you want to share your Wi-Fi settings
once - and wait 10 seconds for initialization.
Left - LED#1 :
• Flashing Blue: Looking for the Wi-Fi network
• Solid Blue: Hooked to the Wi-Fi network
• Flashing Red: Remote control feedback
• Flashing Blue/Purple: Wi-Fii setting mode
Right - LED#2 :
• Solid Blue : Airplay input selected
• Solid Red : Dock input selected
• Solid Green : USB input selected
• Solid Purple : AUX input selected