Advertisement
Quick Links
Standard iControlr Power Supply Kit
Removing Old Power Supply
E 2020 Nordson Corporation
This instruction sheet is a guide for upgrading to the Standard iControl
Power Supply.
WARNING: Allow only qualified personnel to perform the following tasks.
Follow the safety instructions in this document and all other related
documentation.
WARNING: Turn all power off to the system before performing any
procedures.
See Figure 1.
1. Cut any cableties away from the AC power harness (8) and DC power
harness (4).
2. Disconnect the AC power harness (8) from the terminal block (9).
3. Disconnect the DC power harness (4) by disconnecting at the P1 header
(2) on the back plane (1).
4. Disconnect the digital flow connections (3) from the power supply
terminals (5A and 5B).
5. Support the power supply bracket (11) while removing the M4 x 12
screws (12) and save these screws for installation of the new power
supply.
6. Remove the bracket (11), power supply (10), along with the DC and AC
harness (4, 8) from the sub-panel.
Instruction Sheet
P/N 1107150-02
Part 1107150-02
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Nordson Standard iControl
Summary of Contents for Nordson Standard iControl
- Page 1 Instruction Sheet P/N 1107150-02 Standard iControlr Power Supply Kit This instruction sheet is a guide for upgrading to the Standard iControl Power Supply. WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation.
- Page 2 Standard iControl Power Supply Kit GRN/YEL Brown Blue Blue +5.25V Blue Black Black +24V Grey Grey GRN/YEL max.10A max.10A 240V 240V 110-125 110-125 Power Supply with Bracket Figure 1 iControl Main Cabinet Sub-Panel with Old Power Supply 1. Back plane 5B.
- Page 3 Standard iControl Power Supply Kit Installing New Power Supply See Figure 2. Use the iControl Power Supply Kit to install the new power supply and new harnesses. 1. Mount the new bracket (11) onto the sub-panel using the M4 x 12 screws (12) saved from the power supply removal.
- Page 4 Standard iControl Power Supply Kit Blue Brown GRN/YEL Black Blue GRN/YEL max.10A max.10A 240V 110-125 240V 110-125 Power Supply with Bracket Blue Blue Orange Brown Blue Brown 24 COM Grey GRN/YEL Black V2 COM V1 COM Black Grey Black 13, 14...
- Page 5 Standard iControl Power Supply Kit Parts To order parts, call the Nordson Finishing Customer Support Center at (800) 433-9319 or contact your local Nordson representative. Part Description Quantity Note 1107142 KIT, power supply, Ace, Standard iControl 1098442 S POWER SUPPLY, 400W, +24V, 12V, +5V, 5 slot −...
- Page 6 Standard iControl Power Supply Kit Issued 03/2020 Original copyright date 2011. iControl, Nordson, and the Nordson logo are registered trademarks of Nordson Corporation. Part 1107150-02 E 2020 Nordson Corporation...
Need help?
Do you have a question about the Standard iControl and is the answer not in the manual?
Questions and answers