Traulsen RDT132DUT-HHS Specification Sheet

Project
Model Specified:
"D-Width" Reach-In Refrigerator-Freezer
Models/Self-Contained
INTELA-TRAUL
®
Equipped!
Model RDT132DUT-HHS
(shown with optional casters)
Standard Product Features
• R-Series: Stainless Steel Exterior & Interior
• A-Series: Stainless Steel Exterior/Anodized Aluminum Interior
• INTELA-TRAUL Microprocessor Control System
®
• Balanced, Self-Contained Dual Refrigeration Systems Using
R-134a & R-404A Refrigerants
• Scroll Blower Type Evaporator Fan (2 section models only)
• Biased Return Air Duct (2 section models only)
• Full or Half Length Stainless Steel Doors With Locks (full-
length doors n/a on one-section models)
• Self-Closing Doors With Stay Open Feature At 120 Degrees
• Guaranteed For Life Cam-Lift Hinges
• Guaranteed For Life Horizontal Work Flow Door Handle
• Standard Door Hinging: 132D = Right, 232D = Left/Right (other
hingings not available for 2-section models)
• Automatically Activated Incandescent Lights
• Stainless Steel Breaker Caps
• Chrome Plated Adjustable Shelves (installed at the factory)
• Automatic Non-Electric Condensate Evaporator (2 section
models only)
• Magnetic Snap-In Door Gaskets
• Gasket Protecting Metal Door Liner
• Controllable Anti-Condensate Door Perimeter Heaters
• Thermostatic Expansion Valve Metering Device
• Stainless Steel One-Piece Louver Assembly
• 9' Cord & Plug Attached
• Set of Four (4) 6" High Adjustable Stainless Steel Legs
• One Year Parts And Labor Warranty
• Two Year Control Warranty (parts and labor)
• Five Year Compressor Warranty
Listed by Underwriters Laboratories Inc., to
U.S. and Canadian safety standards and
Listed by NSF International.
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
Quantity
One & Two Section Models, 32" Deep
2-Section Full Length Door Model
R
1-Section Half Length Door Model
SERIES
2-Section Half Length Door Model
Stainless Exterior
& Interior
2-Section Full Length Door Model
A
1-Section Half Length Door Model
SERIES
2-Section Half Length Door Model
Stainless Exterior,
Anodized
Aluminum Interior
The R & A Series represent Traulsen's Top-of-the-Line product offering. The
"D-Width" reach-in refrigerator/freezer models are all designed to offer
maximum interior storage capacity. Each is supplied standard with such high
quality features as balanced refrigeration systems, microprocessor controls,
communications ability and stainless steel exteriors. Additionally, they offer
the widest range of optional accessories to choose from, and can be
specified for use with many different applications, including: Foodservice,
Correctional, Institutional, Export, etc.
Options & Accessories
• Stainless Steel Finished Back With Rear Louvers
• Re-Hinging Feature For Door(s)
• No. 1 Type Tray Slides To Accommodate either (1) 18" x 26"
or (2) 14" x 18" Sheet Pans, Adjustable To 2" O.C.
• No. 2 Type Tray Slides To Accommodate (1) 18" x 26" Sheet
Pans, Adjustable To 2" O.C.
• Additional Chrome Plated Shelves
• Stainless Steel Shelves In Lieu of Standard Chrome Plated
• Kool Klad Exterior Laminate Decor
• Set of Four (4) 6" High Casters In Lieu of Legs
• Set of Four (4) 4-5/8" High Casters In Lieu of Legs
• 4-1/2" High Stainless Steel Base In Lieu of Legs
• 6" High Stainless Steel Kickplate (for use with standard legs)
• Remote Applications (see spec sheet 12-2 for more details)
• Clear Glass Door(s) In Place Of One Or More Refrigerator
Section Door(s)
• Two Year Service/Labor Warranty Available
Approval: ___________________________________
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
Item #
CSI Section 11400
RDT232DUT-FHS
RDT132DUT-HHS
RDT232DUT-HHS
ADT232DUT-FHS
ADT132DUT-HHS
ADT232DUT-HHS
SECTION
3-3