General Safety Instructions Care and Diligence of the User Safety Symbols Meaning of the Symbols used in the Manual In particular, the user shall ensure that Making the Information Available...
Start-up and Control Before you use the applicator perform functionality test according to the following list: Setting the hot-melt working temperature all LCD types)
Page 7
Setting the Working Temperature of the Hot- Stand including Pressure Regulator and Melt TR 50.4) Manometer General Notice on Hot-Melt Working Temperature all Applicators) Working with Stationary Equipment in connection with pneumatic foot switch) Working with a Balancer Suspender)
Page 8
Start-up and Control Loading Hot-Melt Glue Preparation of the Cartridge TR 50.4 / 55 / 60) Preheating the Cartridge Loading the Hot-Melt Cartridge Using PUR Hot-Melt Cartridges TR 700 / 70 / 80)
Page 9
Modification for Dot and Line Application TR 60 / 80) Applying Hot-Melt Glue Replacement of Nozzles Spraying Hot-Melt Glues TR 60 / 80) After Work...
Need help?
Do you have a question about the PAKARTE TR 50.4.25 and is the answer not in the manual?
Questions and answers