Wireless Microphones; Battery Installation - VocoPro WiFi-Oke Owner's Manual

Wireless Microphones

MICROPHONE DISPLAY
1. Displays remaining battery power.
2. Indicates that the microphone is sending audio.
3. Displays the frequency in MHz that the microphone is
transmitting on.
4. Indicates which microphone is on channel A (this will only
display on one mic).
5. Indicates which microphone is on channel B (this will only
display on one mic).
6. Press the power button to turn the mic on, hold the power
button to turn it off.

BATTERY INSTALLATION

Remove the battery cover on the microphone and insert 2 batteries (AA) make sure they
are connected with the correct polarity. The negative end of the battery should touch
the microphone spring contact. The spring contacts are on opposing ends.
MICROPHONE RECOMMENDATIONS
To get the best performance with the wireless microphones, please follow these tips:
• Hold the microphone ~4 inches from your mouth at a 45 degree angle
• Do not exceed 50 ft from the main unit, operable distance may also be affected by
obstacles blocking line of sight, or if the batteries are low and need to be replaced.
Metal surfaces or walls may also affect wireless transmission.
• If you are not using the microphone, it is recommended to turn it off to extend battery
life and avoid feedback.
• If you have another piece of wireless equipment on the same frequency as the
wireless mics, they may interfere with each other resulting in cutting-out issues.
10