Attaching / Unhooking - Wallenstein GX620 Operator's Manual

4.8 ATTACHING / UNHOOKING TRACTOR
The machine is shipped from the factory in a
basic, universal confi guration that allows it to
be mounted to any model tractor with the ap-
propriate mounting kit. This section will cover
the mounting of some typical kits. Contact your
dealer or the factory for more details about your
specifi c model.
4.8.1 MOUNTING
The Backhoe should always be located on a
level, dry area that is free of debris and other
foreign objects. When attaching the Backhoe
to the tractor, follow this procedure:
1. Make sure that all bystanders, especially
small children are clear of the work area.
2. Make sure there is enough room and clear-
ance to safely back up to the Backhoe.
3. Stop close enough so the hydraulic lines can
reach the couplers on the tractor.
4. Attach the hydraulic system:
a. Use a clean rage or paper towel to
clean dirt from around the coupler on
the hose end and on the tractor.
b. Connect the hose to the tractor
coupler. Be sure the coupler is
securely sealed.
IMPORTANT
Be sure to connect to the circuit
that has a detent to allow for the
steady fl ow of oil.
Fig. 19 MACHINE
Fig. 20 HYDRAULIC LINES
27