Hyundai XG250 Owner's Manual page 100

Exhaust gas cutoff mode :
Air enters the vehicle from the outside.
But if exhaust gas enters the vehicle
from the outside, the exhaust gas cut-
off mode ( ) is automatically con-
verted to the ( ) mode, to prevent
exhaust gas from entering the vehicle.
NOTE:
o It should be noted that prolonged
operation of the heating system
in recirculation mode (
give rise to misting of the winds-
hield and side windows and the
air within the passenger com-
partment will become stale. In
addition, prolonged use of the
air conditioning with the recircu-
lation mode ( ) selected may
result in the air within the pas-
senger compartment becoming
excessively dry.
o When the ignition switch is turned
"ON", the air intake control will
change to ( ) mode (regardless
of switch position). This is normal
operation. The air intake control
operates in "AUTO" mode when
turning the ignition to the ON po-
sition if the "AUTO" mode was
used before shutting off the en-
gine.
) will
!
CAUTION:
If the windows fog up with the Re-
circulation or A.Q.S mode selected,
set the air intake control to the
Fresh air position or A.Q.S control
to "OFF".
B980D01Y-AAT
Heating and Cooling System Off
Press the "OFF" button to stop the
operation of the heating and cooling
system.
FEATURES OF YOUR HYUNDAI
B980E01L-GAT
Air Flow Control
This is used to direct the flow of air. Air
can be directed to the floor, dashboard
outlets, or windshield. Four symbols
are used to represent Face, Bi-Level,
Floor and Floor-Defrost air position.
1- 87
HXG505J