Hyundai XG250 Owner's Manual page 87

1- 74
FEATURES OF YOUR HYUNDAI
B660D01L-GAT
To Resume the Preset Speed
The vehicle will automatically resume
the speed set prior to cancellation when
you push the control switch "RESUME
(ACCEL)" (above 40 km/h).
B660E01L-GAT
To Reset at a Faster Speed
1. Push the control switch "RESUME
(ACCEL)"
2. Accelerate to desired speed. While
the control switch is held, the ve-
hicle will gradually gain speed.
B660F01L-GAT
To Reset at a Slower Speed
B660D01L
1. Push the control button "SET
(COAST)". The vehicle will deceler-
ate.
2. When the desired speed is obtained,
release the control button. While
the control switch is pushed, the
vehicle speed will gradually de-
crease.
NOTE:
o Keep the main switch off when
not using the cruise control.
o Do not use the cruise control
when it may not be safe to keep
the car at a constant speed, for
instance, driving in heavy or vary-
ing traffic, or on slippery (rainy,
icy or snow-covered) or winding
roads or over 6% up-hill or down-
hill roads.
o Pay particular attention to the
driving conditions whenever us-
B660B01L
ing the cruise control system.
o During cruise-speed driving with
manual transaxle vehicle, do not
shift into neutral without depress-
ing the clutch pedal, since the
engine will be overrevved. If this
happens, depress the clutch
pedal or release the main switch.
o During normal cruise control op-
eration, when the set button is
activated or reactivated after ap-
plying the brakes, the cruise con-
trol will energize after approxi-
mately 3 seconds. This delay is
normal.