Table of Contents
Advertisement
WARNING:
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties and packaging screws are not part of this
toy, and should be discarded for your child's safety.
NOTE: Please keep this parent's guide as it contains important
information.
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION – Magic
Lights Castle
1. Make sure the unit is OFF.
2. Locate the battery cover on the top left of
the 1st floor base. Use a screwdriver to
loosen the screw.
3. If used or spent batteries are present,
remove these batteries from the unit by
pulling up on one end of each battery.
4. Install 2 new AA (LR6/AM-3) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance).
5. Replace the battery cover and tighten the screw to secure.
Battery Notice
•
Use new alkaline batteries or fully charged NI-MH (Nickel Metal-
hydride) rechargeable batteries for best performance.
•
Use only batteries of the same or equivalent type as recommended.
•
Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable, or new and used batteries.
•
Do not use damaged batteries.
•
Insert batteries with the correct polarity.
•
Do not short-circuit the battery terminals.
5
5
5
Advertisement
Table of Contents
