Table of Contents
Advertisement
CARE & MAINTENANCE
1. Keep the unit and its metal parts clean by wiping them with a
slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
sources.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on a hard surface and do not expose the unit
to excess moisture or water.
TROUBLESHOOTING
If for some reason the toy stops working or malfunctions whilst
a character is on the MagicPoint™ location, please remove the
character and place them back onto the MagicPoint
If the toy still does not function, or if for some reason the toy stops
working or malfunctions on its own, please follow these steps:
1. Please turn the toy OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the toy stand for a few minutes, then replace the batteries.
4. Turn the toy ON. The toy should now be ready to play with again.
5. If the toy still does not work, install a new set of batteries.
If the problem persists, please contact our Consumer Services
Department and a service representative will be happy to help you.
CONSUMER SERVICES
Creating and developing VTech
responsibility that we at VTech
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products
products is accompanied by a
®
take very seriously. We make
®
.
TM
21
21
21
Advertisement
Table of Contents
