Nursery chest
Introduction
Before assembling and using the product
for the first time, take time to familiarise
yourself with the product first. Read the
following assembly instructions and safety instruc-
tions carefully. Only use the product as described
and for the designated areas of application. Please
keep these instructions in a safe place. If you hand
this product on to a third party, you must also pass
on all documents relating to the product.
Intended use
This product is designed for storage in children's
rooms. It is designed for use in private, dry, indoor
areas. Any use other than previously mentioned or
any product modification is prohibited and can lead
to injuries and / or product damage. The manufac-
turer is not liable for any damages caused by any
use other than for the intended purpose. The product
is not intended for commercial use.
Description of parts
and features
Cover panel
1
Right side panel
2
Left side panel
3
Rear panel
4
Intermediate shelf
5
Door
6
Floor element
7
Front panel (drawer)
8
Side panel (left)
9
Base panel (drawer)
10
Rear panel (drawer)
11
Side panel (right)
12
Furniture knob made of wood
13
Screw-in dowel
14
Eccentric connector
15
Cross-head screw (approx. ø 6 x 42 mm)
16
56152_liv_Kinder-Kommode_Content_LB3.indd 3
Cross dowel
17
Cross-head screw (approx. ø 3 x 10 mm)
18
Cross-head screw (approx. ø 3 x 12 mm)
19
Door hinge
20
L-screw for wall mounting (protection against
21
tilting)
Stabiliser for rear panel
22
Drawer slide
23
Cross-head screw (approx. ø 2.5 x 25 mm)
24
Cross-head screw (approx. ø 4 x 25 mm)
25
Plastic dowel
26
Wooden dowel
27
Furniture gliders (self-adhesive)
28
Plastic washer
29
Scope of delivery
Check the package contents for completeness and
condition of the product immediately after opening
and ensure all parts are present. Do not under any
circumstances assemble the product if the delivery
is incomplete.
1 Cover panel
1 Right side panel
1 Left side panel
1 Rear panel
1 Intermediate shelf
1 Door
1 Floor element
1 Front panel (drawer)
1 Side panel (left)
1 Base panel (drawer)
1 Rear panel (drawer)
1 Side panel (right)
2 Furniture knobs made of wood
10 Screw-in dowels
10 Eccentric connectors
4 Cross-head screws (approx. ø 6 x 42 mm)
4 Cross dowels
4 Cross-head screws (approx. ø 3 x 10 mm)
20 Cross-head screws (approx. ø 3 x 12 mm)
2 Door hinges
1 L-screw for wall fastening (protection against
tilting)
4 Stabilisers for rear panel
Introduction
GB/IE
3
04.05.11 08:35