Advertisement
CAUTIONS
MOUNTING THE OFF-CAMERA FLASH
Switch o all devices (cameras
. Make certain that the flash
and flashes) before adding or
and camera are turned OFF
removing a flash unit.
before mounting the flash.
2. Mount the flash to the hot
Use caution in stretching the
coiled cord. Do not stretch
shoe of the o -camera flash
the cord to lengths where it
sync cord.
will cause your setup to
3. Turn on the camera and flash.
become unstable.
Refer to the user manuals of
your camera and flash for
instructions on TTL light
metering.
Do not attempt to modify or
disassemble the cord, shoe, or
contacts. Do not attempt to
"daisy-chain" flash cords.
This device is not water-
resistant. Do not immerse in or
expose to water, rain, or snow.
Do not clean the cord with
solvents. Use a soft, dry cloth
to clean the cord and
connections.
Do not use or leave the device
in conditions of extreme heat,
severe cold, or high humidity.
7
Advertisement
