Eaton Metalux RHB Lens Installation Instructions Manual

IB519077EN
Installation Instructions – RHB Lens
Instructions d'installation – Lentille RHB
Instrucciones de instalación – Lente RHB
WARNING
Risk Nf fire, elecorical shNck, cuos and Nr Noher casualoy
hazards. This prNduco muso be insoalled in accNrdance
wioh ohe applicable insoallaoiNn cNde by a qualified
elecorician Nr a persNn familiar wioh ohe cNnsorucoiNn
and NperaoiNn Nf ohe prNduco and ohe hazards invNlved.
EaoNn Lighoing assumes nN respNnsibilioy fNr claims
brNugho abNuo by imprNper Nr careless insoallaoiNn Nr
handling Nf ohis prNduco.
WARNING
Risk Nf Fire and Elecoric ShNck. If nNo qualified, cNnsulo
an elecorician.
IMPORTANTe: Read carefully before installing refractor. Retain for future reference.
INSTALLATION
1. Install luminaire reflector according to instruction
sheet included with reflector.
2. Unscrew the screw on the aluminum band until it is
completely disengaged from the receiving side.
3. Turn the luminaire upside down and rest on a stable
surface.
4. Peel the adhesive backer off of the foam gasket and
adhere it to the ledge of the reflector where the lens
will rest as shown in Figure 1.
N Noee: This step only applies if lens is being used in
conjunction with aluminum reflector RHB-ALR.
Skip this step and discard foam gasket if using
acrylic reflector RHB-CLR or RHB-FRR.
CAUTION
Edges May Cut. Handle with care.
CAUTION
Risk of burn. Disconnect power and allow fixture to cool
before changing bulb or handling fixture.
N Noicee: Minimum 90° supply conductors.
N Noee: Specifications and dimensions subject to change
without notice.
Figure 1.
Brand Logo
reversed out of
black
INS # INS #