Troubleshooting - Saeco Talea Ring Operation And Maintenance Manual

P
ROBLEMS
The machine does not turn on.
Hot water or steam is not
dispensed.
Coffee has little crema.
The Brew Group does not come
out.
Coffee is not brewed.
Coffee is brewed slowly.
Coffee leaks out of the dispensing
head.
Please contact the service centre for any problems not covered in the above table or when the suggested solutions
do not solve the problem.
C
AUSES
The machine is not connected to the
power source.
The plug has not been plugged into the
back of the machine.
The hole of the steam spout is clogged. Clean the hole of the steam spout using a pin.
The coffee blend is unsuitable or coffee
is not freshly roasted.
SBS knob turned towards the left
The Brew Group is out of place.
Dregs drawer is inserted.
Water tank is empty.
Brew Group is dirty.
Brew Group dirty.
Dispensing head is clogged.

TROUBLESHOOTING

S
OLUTIONS
Connect the machine to the power source.
Insert the plug into the machine's power
socket.
Change coffee blend.
Turn the SBS knob to the right
Turn the machine on. Close the service door.
The Brew Group is automatically placed in the
correct position.
Group.
Fill the water tank and prime the circuit again.
Clean the Brew Group.
Change coffee blend.
Decrease the dose.
Clean the Brew Group.
Clean the dispensing holes with a soft cloth.
33