P1 P5100SPE User Manual page 39

Maintenance & Care
Be careful not to lose the keyway attached to
the drive shaft.
STEP 3
Remove the plastic drive belt guard by
undoing the 2 bolts and screw holding it in
place, to expose the drive belt:
STEP 4
Inspect the belt for wear or damage and check
tension. There should be no more than 10mm
free play when gently checking tension.
If the belt is damaged or worn, replace
immediately.
STEP 5
Loosen the tension on the drive belt by
undoing the lock nut on the drive cable.
Adjuster
Lock Nut
39