Assembly
STEP 4
Attach the upper handle to the lower handle
by inserting the bolt. Secure in place using the
large locking wheel.
STEP 5
Gently pull the recoil start handle up to the
recoil retaining loop.
STEP 6
Ensure the four screws holding the control
panel to the handle are tight.
14
STEP 7
Lift the rear discharge flap and remove the
mulching plug if installed.
STEP 8
Using the hooks on the grass bag, hook the
grass bag over the corresponding plastic
moulding at the rear of the lawn mower.
STEP 9
Lower the rear discharge flap until it rests on
the grass collector.