P1 P5100SPE User Manual page 26

Starting The Lawnmower
STEP 6
Push the start button. DO NOT keep the
button pressed for longer than 5 seconds.
Once the lawn mower starts, release the start
button. If the lawn mower fails to start after
5 seconds, release the start button, wait 30
seconds then try again.
STEP 7
Allow to run for 15 seconds, then slowly move
the choke lever back towards the run position.
26
Warm Electric Start Procedure
!
NOTE - You MUST ensure the
mower has the correct oil and fuel level
before operation.
STEP 1
Make sure the blade is free of long grass and
the cutting height is set to maximum.
STEP 2
Pull the Operator Presence Control (OPC)
lever towards the main handle.