Recover The T.sonic In Windows 98Se - Transcend T.sonic 610 User Manual

Recover the T.sonic in Windows 98SE

1. Plug your T.sonic into an available USB port. Select the
select Programs > Transcend T.sonic 610 > T.sonic 610 Firmware Update to run the
T.sonic 610 Firmware Update program.
If you have not installed the Windows 98SE driver yet, please install it first.
2. The T.sonic 610 Firmware Update dialog box appears.
3. If the Format Data Area checkbox is checked. The Option message box will appear. Select
Yes to continue.
Running this step will erase all the data on the T.sonic. Please backup all of the data on the
T.sonic first.
4. Select Start to initiate the Firmware Update.
5. The Complete message will appear. Select Close to complete the Recovery procedures.
Your T.sonic has been returned to its initial status.
26
button on the task bar and