Restoring Factory Defaults; Recover The T.sonic ™ 630 In Windows ® Me, 2000 And Xp - Transcend 630 User Manual

If your T.sonic ™ 630 ever stops working properly, try Powering it OFF and ON a number of times.
Alternatively you can try to solve the problem by "
problem, you can use the T.sonic Utility program's Recovery Function to restore the T.sonic
default factory settings. Before using the Recovery program, please read the following sections carefully.
Running the Recovery function will erase all of the data on your T.sonic
The Recovery function is not supported on Mac
To use the Recovery function, you must log in to the Windows
Running the Recovery program will erase all of the data on your T.sonic
If there are bad memory blocks on the Flash memory chip the size of the T.sonic
be smaller after running the Recovery program.
Recover the T.sonic
Plug the T.sonic ™ into an available USB port on your desktop, or notebook computer.
1. The "Found New Hardware" dialogue box will appear.
2. Click on the
Recovery to run the T.sonic 630 Recovery program.
3. Click on the "Start" button to Recover your T.sonic
Selecting this Option will erase all of the data on your T.sonic

Restoring Factory Defaults

Resetting
™
630 in Windows
Figure 30. Found New Hardware
button located on the taskbar and select: Programs > T.sonic Utility >>
Figure 31. Recovery Progress
" the unit. If neither of these options solves the
™ ™
, or Linux Operating Systems.
®
OS with Administrator rights.
®
Me, 2000 and XP
™ 630 .
™
53
™
™
630.
™ 630 .
™ 630 's memory will
630.
630 's