Record An Fm Channel - Transcend T.sonic 610 User Manual

2. Press the right (Next)
channel (CH01 to CH20).
In the channel mode, you can only select from the stored channels (CH01 to CH20). If you want
to scan other channels manually, please return to the setting a channel mode
3. Press the A-B button again and return to the setting a channel mode.

Record an FM Channel

1. Select a desired channel.
2. Press the REC button for 2 seconds.
3. Once the REC button is pressed, the selected channel will start being recorded. On the display,
a recording FM file is generated and placed under the folder name of [/FM/]. The recording file
name sequence starts from [F0001.WAV], then [F0002.WAV], and so forth.
On the display, the total recording time is shown below the current recording time.
4. Press the PLAY button to pause the recording and press the PLAY button again to continue.
5. Press the REC button for 2 seconds to stop the recording and the display will return to the
previous FM status that displayed before the recording.
FM
Record
or left (Previous)
Record Channels
level
2（stereo） 8 KHz
Low
Normal 2（stereo） 16 KHz
2（stereo） 32 KHz
High
of Joypad to select the desired stored favorite
Sample 512MB
rate
16 hr
8 hr
4 hr
15
1 GB
32 hr
16 hr
8 hr