JVC LT-19DA1BJ Instructions Manual page 20

PC Settings
You can adjust the PC screen position, clock and phase. Make sure
your PC is connected.
1) Press [MENU] to display the menu.
2) Press [K / L] to select "DETAIL", then press [OK].
3) Press [K / L] to select "PC Settings", then press [OK].
4) Press [K / L] to select the item you want, then press [OK].
5) Adjust the settings.
"Auto Adjustment"
Press [K / L] to select "Adjust", then press [OK].
Auto Adjustment
EXIT
This function automatically
adjusts the position, clock and
PICTURE
phase of the picture element.
SOUND
CHANNEL
DETAIL
LANGUAGE
• Each setting will be adjusted automatically.
"Horizontal Position, Vertical Position"
Press [s / B] to adjust.
Setting
"Horizontal Position"
0
H. Position
Adjust Move OK
OK
"Vertical Position"
0
V. Position
Adjust Move OK OK
"Clock, Phase"
Press [s / B] to adjust.
Setting
"Clock"
0
Clock
Adjust Move OK
OK
"Phase"
42
Phase
Adjust Move OK OK
6) Press [MENU] to exit.
Press [K / L] to change the items.
Note:
EN
Cancel
Adjust
[s] [B]
move PC move PC
screen left screen right
move PC move PC
screen down screen up
[s] [B]
decrease increase
setting value setting value
Time Zone
You can set the time zone according to the resident area.
1) Press [MENU] to display the menu.
2) Press [K / L] to select "DETAIL", then press [OK].
3) Press [K / L] to select "Time Zone", then press [OK].
4) Press [K / L] to select the time difference you want, then
press [OK].
EXIT
PICTURE
SOUND
CHANNEL
DETAIL
LANGUAGE
5) Press [MENU] to exit.
Transparency
You can set the menu transparent level.
1) Press [MENU] to display the menu.
2) Press [K / L] to select "DETAIL", then press [OK].
3) Press [K / L] to select "Transparency", then press [OK].
4) Press [K / L] to select the transparent level you want, then
press [OK].
EXIT
PICTURE
SOUND
CHANNEL
DETAIL
LANGUAGE
5) Press [MENU] to exit.
Factory Preset
You can restore all the settings to the default.
1) Press [MENU] to display the menu.
2) Press [K / L] to select "DETAIL", then press [OK].
3) Press [K / L] to select "Factory Preset", then press [OK].
4) Press [K / L] to select "Reset", then press [OK].
• All the settings are restored to the default.
5) Press [MENU] to exit.
20
Detail
Lock Setting
Auto
PC Settings
0
0
Time Zone
+1 +1
+2 +2
CI Menu
+3
+3
Transparency
+4 +4
Factory Preset
+5 +5
Detail
0 0
Lock Setting
-1 -1
PC Settings
-2
-2
Time Zone
-3 -3
CI Menu
-4 -4
Transparency
-5
-5
Factory Preset
-6 -6