JVC LT-19DA1BJ Instructions Manual page 10

Manual Scan
DTV
You can adjust a digital channel individually.
1) Press [MENU] to display the menu in digital mode.
2) Press [K / L] to select "CHANNEL", then press [OK].
3) Press [K / L] to select "Manual Scan", then press [OK].
4) Press [s / B] to select the channel number you want to scan.
• The tuner will start searching up or down automatically.
When a channel is found, the searching will stop.
Manual Scan
EXIT
Channel Number
PICTURE
Signal Strength
SOUND
CHANNEL
DETAIL
LANGUAGE
5) Press [MENU] to exit.
ATV
You can adjust an analogue channel individually.
1) Press [MENU] to display the menu in analogue mode.
2) Press [K / L] to select "CHANNEL", then press [OK].
3) Press [K / L] to select "Manual Scan", then press [OK].
4) Press [s / B] to select the channel number you want to scan.
5) Press [K / L] to select "Frequency".
6) Press [the Number buttons] to enter the frequency.
• To select 24, enter [0] first, then press [2] and [4].
7) Press [s / B] to start searching.
• The tuner will start searching up or down automatically.
When a channel is found the searching will stop.
Manual Scan
EXIT
PICTURE
Channel
Frequency
SOUND
Color System
CHANNEL
Sound System
DETAIL
21%
LANGUAGE
8) Press [K / L] to select "Color System", then press [OK].
9) Press [K / L] to select the system ("Pal, SECAM") you want,
then press [OK].
Manual Scan
EXIT
Channel
PICTURE
Frequency
SOUND
Color System
CHANNEL
Sound System
DETAIL
LANGUAGE
EN
69
P
100 100
Now Peak
BACK
10 key Ch change OK Back
P
1
222 MHz
Pal
B/G
Pal
SECAM
10) Press [K / L] to select "Sound System", then press [OK].
11) Press [K / L] to select the system you want, then press [OK].
e.g.) "Color System" is "Pal"
EXIT EXIT
PICTURE PICTURE
SOUND SOUND
CHANNEL CHANNEL
DETAIL DETAIL
LANGUAGE LANGUAGE
12) Press [MENU] to exit.
Language Selection
DTV ATV
You can select the main language.
1) Press [MENU] to display the menu.
2) Press [K / L] to select "LANGUAGE", then press [OK].
3) Press [K / L] to select your desired item, then press [OK].
4) Press [K / L] repeatedly to select the language you want, then
press [OK].
EXIT
PICTURE
SOUND
CHANNEL
DETAIL
LANGUAGE
5) Press [MENU] to exit.
Note:
• "Audio Language" and "Subtitle Language" are
available only for digital mode.
• While watching a programme, you can change the
audio language easily using [
] when it is available.
• While watching a programme, you can change the
subtitle language easily using [
when it is available.
10
Manual Scan Manual Adjust
Channel Channel
Frequency Frequency
L
Color System Color System
L'
B/G
Sound System Sound System
D/K B/G
l
D/K
Setup
English
Menu Language
French
Audio Language
French
Subtitle Language
(audio language) /
(subtitle) / ]