Technical Data; Functional Description; Before Commissioning - Toolson HRB1700 Translation Of The Original Instruction Manual

Keep this safety information in a safe place.

6. Technical data

Motor
Engine power kW
Rotation speed max. min
-1
Fuel tank
Fuel
Engine Type
Starting System
Displacement ccm
Oil type
spark plug
Water connection
Feed temperature max.°C
Feed volume min. l/min
Min. feed pressure MPa
Max. feed pressure MPa
Max. Inlet hose length m
Inlet hose diameter (inner diameter)
Pump
Working pressure bar (max.)
Flow rate l/min
Oil quantity - pump liter
Detergent suck
ml/min
Max. recoil force of hand spray gun
N
Detergent Only use cleaning agents
Weight kg
Noise and vibration values
The noise and vibration values were determined ac-
cording to EN 60335-2-79 (EN ISO 3744 / ISO 5349-
1).
Sound pressure level L dB(A)
pA
Uncertainty K dB
Sound power level L dB(A)
WA
Uncertainty K dB
Vibration total values a
h
uncertainty K determined according to EN 60335-
2-79
Vibration emission value a
h
Uncertainty K
Limit the noise and vibration to a minimum!
• Only use appliances which are in perfect working
order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
3,3
3600
0,9
Gasoline (Un-
leaded)
4-stroke
air cooled
Recoil starter
173
10W30
F7RTC
50
9
0,2
1,0
15
min.
Ø 12,7 mm
180(max. 200)
8,7
0,1
450
27
approved for high
pressure cleaners
26
82,3
3
105
3
(triax vector sum) and
1,02 m/s²
1,5 m/s²

7. Functional description

Nozzle Extension with Quick Connect (4)
Permits easy switching between five different spray
tips (12)
Run / Stop Switch (16)
Set this switch (16) to "I" before using recoil starter
(22). Set switch to "0" to switch off engine
Chemical Injection Siphon/Filter (23)
Used to siphon detergent or other pressure washer
chemicals into the low pressure stream..
High Pressure Hose Connection (18)
To connect high pressure hose.
Flexible high pressure hose (13)
Connect one end to the water pump and the other
end to the spray gun.
Fuel Tank (11a)
Fill tank with recommended fuel.
Air Filter (24)
Protects engine by filtering dust and debris out of in-
take air.
Oil Fill Cap (20)
Fill engine with oil here.
Reversing starter (22)
For manual starting of the engine.
Quick Connect Spray Tips (12)
Detergent, 0°, 15°, 25°, and 40°: for various cleaning
applications.
Spray lance (2)
Controls the application of water onto cleaning sur-
face with trigger device. Includes safety latch.
Choke Lever (Fig. 21/Pos."Z")
Prepares a cold engine for starting.
Water Inlet (external) (19)
Connect garden hose here.

8. Before commissioning

Fitting the Stand (Fig. 3)
Fasten the stand (8) as shown in figure 3.
Installing of the transport wheels (Fig. 3)
Mount the supplied transport wheels (6) with the cor-
responding bolts on the frame of the device as shown
in figure 3. Secure them with a split pin on the inside.
Attaching the handle to the device (Fig.4)
Fit the handle (1) to the handle tubes are already on
the device. Make sure that the holes in the handle (1)
are aligned with the holes in the handle tubes.
Push the handle (1) downwards until it locks into the
2 locking pins.
GB | 29