Avoiding Problems With Connectors - VAKI Bioscanner User Manual

Bioscanner Manual
7. A
VOIDING PROBLEMS WITH CONNECTORS
Cleaning the connectors on scanners, cables and on the control unit after use with electronic
cleaning solvent spray will prolong live and assure proper functioning of your equipment for a
long time.
Another step is vital when using the Bioscanner:
 Keep the cables connected to the scanner at all time when working in salt water
The following maintenance procedure is recommended for all connectors on cables and
equipment from Vaki.
 Clean all connectors after use with Electronic Cleaning Solvent Spray. (Ask your local
electrician where you can buy cleaning solvent, type Electrolube or equal)
 Inspect cables for damage and make them up for storing. Check the O-ring rubber sealing
in the female type connectors.
 Store equipment in a dry place when not in use.
 Connect all cables to scanners pre entering the site
 Avoid disconnecting the scanners at sea site
 Take precaution steps when installing at site. Keep cables free of walkways and other
places where cable can accidentally be frayed or cut.
www.vaki.is
Page 24 of 25