Table of Contents
Advertisement
Bioscanner Manual
3.2 C
ONTROLLING THE WATER
For correct operation the amount of water must be adjusted to the size of the fish. Generally
speaking, better separation of the fish will be achieved if not too much water is used. On the other
hand sufficient water must be used to flush the fish smoothly down the channel. The following
table can be used as a rough guideline. The figures are for salmon, other fish species (different
shape) may require slightly different amounts of water.
The figures shows how correct water flow can be achieved by using a stop watch and a water
bucket (12 – 14 litres). The time is measured while the water flows from the channel and fills the
bucket.
Fish size
Flow per channel
Up to 10 gr.
3 - 6 l. /min.
10 - 30 gr.
6 - 10 l. /min.
30 - 150 gr.
10 - 60 l. /min.
150 - 1500 gr.
60 - 130 l. /min.
1500 - 6000 gr.
130 - 210 l. /min.
3.3 S
LOPE OF THE CHANNEL
Generally, the slope of
the V-channel should be
about 0° - 5° for stable
operation.
For
capacity
(and
accuracy) the slope can
be increased to 10° - 15°.
www.vaki.is
-
FLOW
higher
lower
Page 13 of 25
Advertisement
Table of Contents
