Attaching The Pvc Plastic Cover; Fitting The Clamp; Installing The Scanner Unit - VAKI Bioscanner User Manual

Bioscanner Manual

2.2.1 Attaching the PVC plastic cover

2.2.2 Fitting the clamp

See chapter 2.1.4 Fitting the clamp.

2.2.3 Installing the scanner unit

See chapter 2.1.5 Installing the scanner unit.
www.vaki.is
Prepare 10 M5 bolts and
nuts, two strips, the
plastic cover on top of
the channel, aligning the
holes in the cover and
the channel, then place
the strips on the top of
the cover aligning the
holes and put all the M5
bolts in before
tightening fully with the
M5 nuts on the other
side.
Page 11 of 25