Level Of The Channel; Counting; Power Failure; End Of Operation - VAKI Bioscanner User Manual

Bioscanner Manual
3.4 L
EVEL OF THE CHANNEL
By pouring some water
into the bottom of the V-
channel, it is possible to
use the channel itself as a
level indicator.
3.5 C
OUNTING
The Bioscanner is now ready for counting. It displays the number it had before the power was cut
the last time. Double clicking on the count textbox for each Bioscanner will reset the count for
that Bioscanner to zero. Pressing the Start button will start counting from zero for all Bioscanners
and will generate a pdf report after clicking the Stop button.
3.6 P
OWER FAILURE
In the event of accidental power failure the counter will stop counting but the control unit will
remember the counting figures from when the power failed. Clicking the Start button will reset
the counters back to zero so be sure to take note of the numbers if you want to keep them.
3.7 E
ND OF OPERATION
When the counting operation is completed, disconnect the leads and store the equipment in a
dry place. Screw caps on connections and plug cables end to end. Clean and dry the scanners with
a soft cloth.
NEVER CLEAN THE WINDOWS WITH ACETONE, AS IT WILL RUIN THEM COMPLETELY.
www.vaki.is
!
Page 14 of 25