Advertisement
2. Set your device to Hard Drive mode
(Tools > Settings > Storage > USB
mode).
3. Connect your ARCHOS to your PC and
open up the folder "System" of the
device.
4. Delete the file "epglist.dat" in the
folder "EPG".
5. Reconnect to your PC and run
ArchosLink.
Select
Program Guide" and click on the button
"Download".
I tried to set my Infrared Emitter but I could not find my tuner brand in
the available list.
How can I get the DVR Station to control my cable box, satellite
receiver, etc.?
Proceed as follows:
1. Make sure you are running the latest
version of the firmware (see
the
firmware
complet).
As there are constantly new video
products being added to the market,
there may be some devices that are not
listed.
2.Try using all of the codes for a
particular brand, there are typically
more than three or four for any given
brand (ex: When setting the code, 2/4
means that your trying code group 2 of
4 available code groups).
If your brand is not listed, then try to
find
out
if
that
manufactured
by
whose brand is on the list.
The codes for that brand would then be
compatible with your device.
Can I record a TV show and watch another channel at the same time?
Only if the TV box has 2 tuners or if you
have 2 video sources.
I cannot register my DVR Station on my customer account.
Since the DVR Station is an accessory, it
is not registered as a stand alone
(c) 2020 ARCHOS <noreply@archos.com> | 2020-05-07 07:51
URL: http://faq.archos.com//index.php?action=artikel&cat=138&id=99&artlang=en
Archives
the
"Update
Updating
dans
notre
manuel
brand
is
actually
another
company
Page 32 / 34
TV
Advertisement
