Trane IntelliPak SCWG 020, SCWG 025, SCWG 030, SCWG 035, SWG 020, SWG 025, SWG 030, SWG 035, SCRG 020, SCRG 025, SCRG 032, SRG 020, SC Installation Manual page 75

Startup Log
Complete this log at unit start-up.
Unit: ____________________________
Unit Voltage: __________ __________ __________
A
Evaporator:
Evaporator fan motor horsepower: __________
Evaporator fan RPM (actual): ____________________
Evaporator System Static (from test and balance report or actual readings):
Supply Duct Static: __________
Return Duct Static: __________
Evaporator Air Conditions with both compressors operating:
Enter:
Dry Bulb - F: __________
Wet Bulb - F: __________
Evaporator System CFM (test and balance sheet or actual tested): __________
___________________________________________________________________________________________________________________________
Compressor Amp Draw:
Circuit A: __________ __________ __________
A B
Circuit C: __________ __________ __________
A B
Suction Pressure - psig: Circuit A: __________
Discharge Pressure - psig: Circuit A: __________
Super Heat - F: Circuit A: __________
Liquid Line Pressure - psig: Circuit A: __________
Sub Cooling - F: Circuit A: __________
___________________________________________________________________________________________________________________________
SCXG-SVX01B-EN
Installation
Unit Location: _________________________________________
B C
Evaporator fan motor amps: __________ __________ __________
Leaving:
Dry Bulb - F: __________
Wet Bulb - F: __________
Circuit B: __________ __________ __________
C
Circuit D: __________ __________ __________
C
Circuit B: __________
Circuit B: __________
Circuit B: __________
Circuit B: __________
Circuit B: __________
A
A B C
A B C
Circuit C: __________
Circuit C: __________
Circuit C: __________
Circuit C: __________
Circuit C: __________
Startup
B C
Circuit D: __________
Circuit D: __________
Circuit D: __________
Circuit D: __________
Circuit D: __________
75