EnGenius DURAFON SN902 Product Support & Faq page 5

DURAFON SN902 & SN922 PRODUCT SUPPORT & FAQ's
Product Question
SP922 How do I add an additional
line?
SP922 How do I register a new
handset?
SP922 How do I reset the base
unit?
SP922 How can I select a particular
line for an outgoing call?
SP922 Can the base be used as a
monitor?
SP922 Is the system expandable?
SP922 Can I page all the handsets?
SN902 What is covered by the
SP922 Warranty?
SN902 What is not covered by the
SP922 Warranty?
SN902 What is the Warranty
SP922 period?
Answer
Just plug the next line in to the base
unit beginning at L1, then L2, then L3,
then L4.
On the base unit, press and hold REG
button until the line LED's come on,
then on the new handset press
Menu 6 1.
The Base can be reset by inserting a
pen tip or paper clip to press and hold
the RESET button on the base unit.
To activate, press Menu 5 8 to enter
the line selection mode, turn selection
to On. Then press talk button on
handset and select which line you
require, 1, 2, 3, 4.
No
Yes, each base can register up to 90
handsets.
From one handset, a group of handsets
can be paged by pressing 2-way and
entering a group number.
Manufacture defects in material or
workmanship.
Damage due to misuse, abuse and
accidents.
One year for the base and handset(s).